Fujitsu ScanSnap iX100

Parts and Functions
This section explains the names and functions of the ScanSnap parts.
Front
3
1
2
4
7
6
5
No. Name Description
1 Feed guide (*1) Open it to use the ScanSnap.
Opening it turns on the ScanSnap. Then, you can place a document
on it to insert the document.
2 Output guide Open it to eject documents from the front of the ScanSnap.
Select an ejection method depending on the document type you are
scanning.
For details about documents that can be scanned with the
ScanSnap, refer to "Documents to Scan" (page 67).
l When the output guide is closed
l When the output guide is open
Parts and Functions
35