a The following message appears.
3. Click the [OK] button to close the message.
4. Click the [OK] button to close the [Scanning mode option] window.
5. Click the [Apply] button in the ScanSnap setup window.
6. Click the [ ] button in the upper left of the window to close the ScanSnap
setup window.
ATTENTION
For documents described below, bleed-through reduction may not function effectively. In that case,
clear the [Reduce bleed-through] checkbox.
l Documents with light colored letters or pictures/documents with thin letters or lines/documents with
a dark background color
The color may not be reproduced or the color may be changed. If you want to recognize the
marked character strings, the recognition rate for the characters may be lowered.
l Documents where the color for letters is light or the letters are thin
The recognition rate for the characters may be lowered.
l Documents with a lot of bleed-through
The bleed-through may be emphasized.
Reducing Bleed-Through
61
To Next Page
Loading...
Need help?
General
Weight and Dimensions
