Fujitsu ScanSnap S300 - Chapter 1 Preparation; Checking the Contents of the Package

11
Chapter 1 Preparation
This chapter describes necessary preparations before using ScanSnap.
1.1 Checking the Contents of the Package
This manual describes how to install and connect the ScanSnap to your computer, and
describes basic operations of the ScanSnap.
Refer to the following manuals when necessary.
ATTENTION
Do not connect the scanner to your computer before installing
"ScanSnap Manager."
If the scanner is connected before installing ScanSnap Manager, it will
not operate correctly.
For the installation of ScanSnap Manager, refer to page 14
Manual See
ScanSnap S300 Getting Started
(Cable Connection)
(paper)
Plastic bag where the supplied cables are packed
ScanSnap S300 Operator’s Guide
(PDF)
• ScanSnap Setup CD-ROM
• After installation of ScanSnap Manager, select
[Start] D [All Programs] D [ScanSnap Manager]
D [ScanSnap Operator’s Guide].
ScanSnap Organizer User’s Guide
(PDF)
• ScanSnap Setup CD-ROM
• After installation of ScanSnap Organizer, select
[Start] D [All Programs] D [ScanSnap
Organizer] D [Manual].
CardMinder User’s Guide
(PDF)
• ScanSnap Setup CD-ROM
• After installation of CardMinder, select [Start] D
[All Programs] D [CardMinder] D [Manual].
ATTENTION
To browse the manuals above, you will need to install Adobe
®
Reader
®
(Acrobat Reader™) or an equivalent PDF-supported application, or
ScanSnap Organizer.