EasyManuals Logo

Fujitsu ScanSnap S300 Getting Started Guide

Fujitsu ScanSnap S300
37 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
ScanSnap S300 Getting Started 18
When connecting with the Power cable:
Use the power cable and USB cable .
1. Connect the Power cable.
Remove the adhesive label covering the USB and Power connectors.
Connect to the ScanSnap’s power connector and an outlet.
2. Connect the USB cable.
Connect the USB cable to both the ScanSnap and personal computer.
3. After power and USB ports are connected with cables, perform the
procedure described in "Turning the ScanSnap ON" (page 20).
ATTENTION
When using the USB bus power cable, the personal computer must
have two USB ports; one for power feeding, the other for USB cable
connection.
When connecting with the USB bus power cable via a USB hub, use a
powered hub equipped with an AC adapter.
When the scanner is connected with the USB bus power cable, the
scanning speed becomes slow.
Double-sided color documents of A4 or letter in size can be scanned
at a speed of:
Power-cable-connected: Approx. 8 sheets/minute
USB-bus-power-cable-connected: Approx. 4 sheets/minute
(when used with a computer with Intel
®
Celeron
®
M 430 1.73 GHz or
higher that runs Windows 2000, Windows XP or Windows Vista and with
Scan mode set to Normal, Color mode Auto, and Compression rate 3, and
others set to defaults)
USB port
Power connector
USB connector
PC

Other manuals for Fujitsu ScanSnap S300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Fujitsu ScanSnap S300 and is the answer not in the manual?

Fujitsu ScanSnap S300 Specifications

General IconGeneral
Film scanningNo
Color scanningYes
Input color depth- bit
Maximum scan size216 x 360 mm
Scanner typeSheet-fed scanner
Sensor typeCIS
Minimum scan area (ADF)50.8 x 50.8 mm
ISO A-series sizes (A0...A9)A4, A5, A6
ISO B-series sizes (B0...B9)B5, B6
Maximum ISO A-series paper sizeA4
Auto document feeder (ADF) input capacity10 sheets
Bundled softwareScanSnap Manager V4.2, ScanSnap Organizer V3.2, CardMinder V3.2
Scan media weight64 - 104.7 g/m²
Dimensions (WxDxH)284 x 95 x 77 mm
Power requirementsAC 100V to 240V, 50 / 60 Hz
Dimensions (W x D x H) (imperial)11.18 x 3.74 x 3.03 \
Maximum scan area (ADF) (imperial)8.5 x 14.17 \
Minimum scan area (Auto Document Feeder)2 x 2 \
Minimum RAM512 MB
Minimum storage drive space920 MB
Compatible operating systemsWindows 2000 Professional, Windows XP, Windows Vista
Power supply typeAC/USB
Power consumption (standby)5 W
Power consumption (typical)9 W
Sustainability certificatesENERGY STAR
Operating temperature (T-T)5 - 35 °C
Operating relative humidity (H-H)20 - 80 %
CertificationRoHS
Weight and Dimensions IconWeight and Dimensions
Weight1400 g

Related product manuals