Fujitsu ScanSnap S300 Getting Started Guide

ScanSnap S300 Getting Started 24
2. Adjust the side guides to the width of the loaded document.
3. Press the [SCAN] button.
⇒ Scanning is started.
⇒ The ScanSnap Quick Menu appears after scanning.
4. Select a desirable action in the ScanSnap Quick Menu for the image of the
scanned document.
ATTENTION
Set the paper with its face up and its bottom margin towards the
scanning direction when you configure the settings as follows:
In the [ScanSnap Manager - Scan and Save Setting] dialog box,
select the [Scanning] tab
D [Option] D [Set the document with its
face up].
HINT
The scanning method above is for the case where the [Quick Menu Mode] is
applied.
If you switch to the [Left-click Menu Mode], you will be able to perform the
scanning operation with the specified application without the Quick Menu
displayed. You can also switch to any settings for scanning if you register
scanning configurations to the Left-click Menu in advance. When you
become accustomed to the ScanSnap operation, switch the Operation
Mode during operation when needed.
The Operation Mode can be switched by right-clicking the ScanSnap icon
on the task bar and then marking [Use Quick Menu].
The ScanSnap scanner can scan documents using various settings.
Refer to the "ScanSnap S300 Operator's Guide" on the ScanSnap Setup
CD-ROM to learn more.
S

Fujitsu ScanSnap S300 Specifications

General

Film scanning	No
Color scanning	Yes
Input color depth	- bit
Maximum scan size	216 x 360 mm
Scanner type	Sheet-fed scanner
Sensor type	CIS
Minimum scan area (ADF)	50.8 x 50.8 mm
ISO A-series sizes (A0...A9)	A4, A5, A6
ISO B-series sizes (B0...B9)	B5, B6
Maximum ISO A-series paper size	A4
Auto document feeder (ADF) input capacity	10 sheets
Bundled software	ScanSnap Manager V4.2, ScanSnap Organizer V3.2, CardMinder V3.2
Scan media weight	64 - 104.7 g/m²
Dimensions (WxDxH)	284 x 95 x 77 mm
Power requirements	AC 100V to 240V, 50 / 60 Hz
Dimensions (W x D x H) (imperial)	11.18 x 3.74 x 3.03 \
Maximum scan area (ADF) (imperial)	8.5 x 14.17 \
Minimum scan area (Auto Document Feeder)	2 x 2 \
Minimum RAM	512 MB
Minimum storage drive space	920 MB
Compatible operating systems	Windows 2000 Professional, Windows XP, Windows Vista
Power supply type	AC/USB
Power consumption (standby)	5 W
Power consumption (typical)	9 W
Sustainability certificates	ENERGY STAR
Operating temperature (T-T)	5 - 35 °C
Operating relative humidity (H-H)	20 - 80 %
Certification	RoHS

Weight and Dimensions

Weight	1400 g