ScanSnap S500M for Macintosh Getting Started | 17
12. Close the ADF.
Ö You should hear the ADF click when it returns to
its original position.
13. Turn on the scanner.
Ö ScanSnap Manager icon changes from to .
14. Click and hold down the mouse button on the
"ScanSnap Manager" icon
in the Dock menu, and
select [Check consumable supplies] from the pop-up
menu.
15. In the “Check consumable status” window, click the
[Reset] button of the consumable you have replaced.
Ö A confirmation pop-up screen appears.
Ö When clicking the [Yes] button, the counter is reset
to “0.”
ADF
To Next Page
Loading...
