To Next Page

To Previous Page

Important notes Note on safety

U41858-J-Z126-2-76 19

Dokuschablonen 19x24 Version 7.4us für FrameMaker V7.x vom 09.02.2010 © cognitas GmbH 2001-2010

12. April 2017 Stand 18:58.58 Pfad: P:\FTS-BS\Server\SE-Server\SE-Doku\1303913_BA_Basis_update_2\prod_e\ba_basis.k02

2.3 Note on safety

2.3.1 Important alert messages

v CAUTION!

This alert signal indicates a hazardous situation that could result in minor or

moderate personal injury if the user does not perform the procedure correctly. This

signal also indicates that damage to the product or other property may occur if the

user does not perform the procedure correctly.

Warning

Possible damage to the system if used incorrectly

Be sure to follow the precautions below when installing the equipment. Otherwise, the business

server may be damaged.

Possible damage to the system if used incorrectly

In the factory all the power cables are connected to the power distribution units which are integrated

into the rack. Attach the connection cables of the multiple socket outlets to the in-house installation

so that they are easy to access.

Do not connect any additional consumer loads to the power distribution units - this could cause the

nominal load capacity of the multiple socket outlet or feed cables / fuses to be exceeded! If you want

to connect additional equipment, please contact Customer Support.

Possible data loss if used incorrectly

Before shutting down power, you should ensure that the following events occur; otherwise data may

be destroyed.

All applications have finished processing.

No user is using the components.

When a unit of the SE server (MU, SU, HNC or AU) is turned off, the operating status indicator lights

up orange. Check this before shutting down the main power (to UPS, power cable, and power distri-

bution box).

If necessary, back up files before shutting down.

Fujitsu SE500 Basic Operating Manual

Other manuals for Fujitsu SE500