26
- Active Digitizer/Touchscreen
Clicking on Active Digitizer Display
To left-click, touch the object you wish to select and then lift
the stylus tip immediately.
Figure 11. Clicking on the Active Digitizer Display
Figure 12. Right-clicking Active Digitizer
Right-Clicking on Active Digitizer
Right-click can be accomplished by holding the front
of the toggle button down while tapping on the
screen. To change the settings for the right-click
feature, go to Start -> Control Panel -> Pen and Touch.
In the Pen Options tab, select “Press and Hold” then
click the [Settings] button.
To Next Page
Loading...
