Working with the Tablet PC
Pen position
To prevent the pen from becoming jammed in its slot (1), make sure that you
always insert the pen into its slot the correct way round (the charging contacts
on the pen point towards the eyelet for the pen cord).
1
Energy saving functions of the pen
To save energy, the pen automatically switches off after 10 minutes of inactivity
and is then in power saving mode.
The pen automatically returns to normal operating mode after the ne xt contact with the pen tip.
Charging the pen battery
The pen contains an integrated battery, which is automatically charged w hen the
pen is fully inserted into its slot. The pen is also charged when the Tablet PC is in
power saving mode or is switche d off. A charging time of approximately 15 secon ds
is sufficient to enable to pen to be used for 90 minutes again.
► Insert the pen fully in the slot.
After a charging period of approximately 5
minutes, the pen battery is fully ch arged .
Fujitsu 31
To Next Page
Loading...
Need help?
General