Troubleshooting and tips
The cursor does not correctly follow the
pen movements
Cause
Fault e limination
Pen incorrectly calibrated
► Calibrate the pen as describe d in chapters
"
Setting the pen", Page 32 and "Calibratin g
the p en", Page 32.
Pen input not working
Cause
Troubleshooting
The pen is in power-saving mode. ► Press the pen button gently to wake the pen
from sleep mode.
The p en battery is completely discharged.
► Insert the pen fully into its s lot on the Tablet
PC to charge the pen battery.
The Tablet PC does not start after switch on
TheTabletPC
Cause Tro ub lesho ot ing
The battery is dead.
► Charge the battery.
or
► Connect the mains adapter to the Tablet
PC.
The power adapter is not connected correctly.
► Check whether the mains adapter is
connected c orrectly to the Tablet PC.
► Switch on the Tablet PC.
The Tablet
PC stops working
TheTable
tPC
Energysa
vingmode
Cause Troublesh
ooting
The Tablet PC is in energy saving mode.
► Leave ene
rgy saving mode.
An application programme has c aused the
malfunction.
► Close the application program or restart
the Tablet PC (by restarting the operating
system or switching the device off and back
on again).
The battery is dead.
► Charge
the battery.
or
► Connect the mains adapter to the Tablet
PC.
84 Fujitsu
To Next Page
Loading...
Need help?
General