Working with the Tablet PC
Removing the memory card
Memorycard
To avoid any loss of data, always follow the correct procedure for removing the
card (see the documentation for your operating system).
2
a
3
1
► Fold out the tablet stand (1).
► Open the slot cover (2).
► Press the edge of the memo ry card so that the mem ory card jumps slightly out of the slot (a).
► Pull the memory card out of the slot (a) in the direction of the arrow (3 ).
► Close the slot cover again.
Wireless LAN/Bluetooth/NFC wireless components
(configura
tion dependent)
The installation of wireless components not approved by Fujitsu will
invalidate the certifications issued for this device.
Switching the wireless components on and off
The wireless components are switched on an d off using the appropriate
functions of the operating system.
► To switch wireless compo nents on a nd off individually, select Settings – Network & Internet.
40 Fujitsu
To Next Page
Loading...
