Fujitsu UTY-ASSX - Page 15

En-14
Copyright© 2013-2016 Fujitsu General Limited. All rights reserved.
Manual adjustment (Maximum/Minimum)
By pressing the
button, the Y Axis scale window is shown.
Maximum/ Minimum of congured value is as below.
Congured (Max) Congured (Min)
Maximum 2000 -100
Minimum 100 -100
Also, if you congure Maximum or Minimum to zero, this conguration is cancelled.
When you congure Maximum or Minimum to a value other than zero, the button
turns orange and conguration becomes effective.
If you switch graph type (See 7-2-3), conguration is reset.
If you press the button , conguration is reset.
If Minimum is bigger than Maximum, Maximum is automatically changed to Mini-
mum+1.