Fujitsu UTY-RNRGZ1 - WEEKLY TIMER SETTING; Enable Schedule; Schedule Setting

Set the Operation Stop Time
(4) Touch the [Operation Stop time] on the “Off Timer”
screen. “Operation Stop Time” screen is displayed.
(5) Set the time by touching [
] or [ ].
(4) (5)
Off Timer
Cancel OK
Fri 10:00AM
Enable/Disable [Enable]
Operation Stop Time [In 0.5 hr]
Fri 10:00AM
Operation Stop Time
Cancel OK
In
hr
0.5
When [OK] is touched, the display returns to the “Off
Timer” screen.
Note
Up to 24 hours can be set.
Apply the setting.
(6) Touch the [OK] on the “Off
Timer” screen. After the set-
ting change screen is dis-
played, the display returns to
the “Timer Setting” screen.
Off Timer
Cancel OK
Fri 10:00AM
Enable/Disable [Enable]
Operation Stop Time [In 0.5 hr]
3-3-3 Auto Off Timer
(1) Touch the [Auto Off Timer] on
the “Timer Setting” screen.
When the “Password Verica-
tion” screen is displayed, enter
the password and touch [OK].
Back
On Timer [Disable]
[Disable]
[Disable]
Off Timer
Auto Off Timer
Timer Setting
Enable the Auto Off Timer.
(2) “Auto Off Timer” screen is displayed. Touch the [Enable/
Disable] on the “Auto Off Timer” screen.
(3) “Enable/Disable” screen is displayed. Touch the [En-
able].
(2) (3)
Enable /Disable [Disable]
[In 30 min.]
[ – ]
Operation Stop Time
Time Range Setting
Auto Off Timer
Fri 10:00AM
Cancel OK
Enable/Disable
Cancel OK
Enable
Disable
When the [OK] is touched, the display returns to the “Auto
Off Timer” screen.
Set the Operation Stop Time
(4) Touch the [Operation Stop time] on the “Auto Off Timer”
screen.
(5) The “Operation Stop” time screen is displayed. Set the
time with [
] or [ ]. The time can be set within the 30
to 240 min. range in 10 min. increments.
(4) (5)
Enable /Disable [Enable]
[In 30 min.]
[ – ]
Operation Stop Time
Time Range Setting
Auto Off Timer
Fri 10:00AM
Cancel OK
After the Manual Operation
Operation Stop Time
Cancel OK
In
min.
30
Fri 10:00AM
When the [OK] is touched, the display returns to the “Auto
Off Timer” screen.
Set the time range of Auto Off Timer
(6) Touch the [Time Range Setting] on the “Auto Off Timer”
screen.
(7) “Time Range Setting” screen is displayed. Touch the
[Time Range] .
(6) (7)
Enable /Disable [Enable]
[In 30 min.]
[ – ]
Operation Stop Time
Time Range Setting
Auto Off Timer
Fri 10:00AM
Cancel OK
Time Range [Continuous]
[
-- : -- ]
[
-- : -- ]
Start Time
End Time
Time Range Setting
Fri 10:00AM
Cancel OK
(8) “Time Range” is displayed.
When specifying a time range
for the “Auto Off Timer”, touch
[Range Spec.] and when
enabling the setting all day,
touch [Continuous].
Time Range
Cancel OK
Range Spec.
Continuous
When the [OK] is touched, the display returns to the
“Time Range Setting” screen. When the [Continuous] is
selected, go to (14).
(9) Touch the [Start Time] on the “Time Range Setting”
screen.
(10) “Start Time” screen is displayed. Set the Start Time by
touching [
] or [ ] on the “Start Time” screen.
(9) (10)
Time Range [Range Spec.]
[
-- : -- ]
[
-- : -- ]
Start Time
End Time
Time Range Setting
Fri 10:00AM
Cancel OK
Fri 10:00AM
Start Time
Cancel OK
hour
AM
08
min.
40
When the [OK] is touched, the display returns to the
“Time Range Setting” screen.
Note
Setting screen format corresponds to the preference of
the “Display format Setting”.
(11) Touch the [End Time] on the “Time Range Setting”
screen.
(12) “End Time” screen is displayed. Set the End Time by
touching [ ] or [ ].
(11) (12)
Time Range [Range Spec.]
[08:40AM]
[ -- : -- ]
Start Time
End Time
Time Range Setting
Fri 10:00AM
Cancel OK
Fri 10:00AM
End Time
Cancel OK
hour
PM
05
min.
40
When the [OK] is touched, the display returns to the
“Time Range Setting” screen.
(13) Touch the [OK] on the “Time
Range Setting” screen. The
display returns to the “Auto Off
Timer” screen.
Time Range [Range Spec.]
[08:40AM]
[05:40PM]
Start Time
End Time
Time Range Setting
Fri 10:00AM
Cancel OK
En-9
En-10