Fujitsu UTY-RNRGZ1 - SETTING; Select Setting Items; Air Flow Direction Setting; VT Air Flow Direction

3SETTING
3-1 Select the Setting Items
(1) Touch the [Menu] on the moni-
tor mode screen.
26.0
°C
Cool
Auto
Set Temp.
Mode
MenuStatus
Fan
Fri 10:00AM
(2) “Main Menu” screen is displayed.
The screen has 2 pages which are switched by touching
the [Next Page] or [Previous Page].
(Items that indoor unit does not support are not dis-
played.)
Monitor
Next
Page
Page 1/ 2 Main Menu
Air Flow Direction
Setting
Weekly Timer
Setting
Timer Setting
Special Setting
Monitor
Previous
Page
Page 2/ 2 Main Menu
Summer Time
Setting
Initial Setting Maintenance
Preference
When the item to be set is touched, each setting screen
is displayed. Refer to the description of each item for
details. When each setting is complete or canceled,
the display returns to this screen. When [Monitor] is
touched, the display returns to the monitor mode screen.
3-2 Air Flow Direction Setting
(1) Touch the [Air Flow Direction
Setting] on the “Main Menu”
screen.
Monitor
Next
Page
Page 1/ 2 Main Menu
Air Flow Direction
Setting
Weekly Timer
Setting
Timer Setting
Special Setting
Note
For the indoor units without air ow direction adjustment
function, [Air Flow Direction Setting] is not displayed.
(2) “Air Flow Direction Setting”
screen is displayed. When the
[VT Setting] or [HZ Setting] is
touched, each setting screen
is displayed.
1 3
Air Flow Direction Setting
Back
VT HZ
Setting Setting
When the indoor unit does not have a horizontal air ow
direction adjustment function, [HZ Setting] is not dis-
played and the air ow direction cannot be set.
When this remote controller is
connected to the cassette type
indoor unit with individual air
ow control function, [Individu-
al VT Hold] is displayed.
1
Air Flow Direction Setting
Back
Individual VT Hold
VT
Setting
For this operation, refer to “3-2-3 Individual VT Hold”.
When the [OK] or [Cancel] is touched at each setting
screen, the display returns to this screen. When [Back]
is touched, the display returns to the “Main Menu”
screen.
Note
When using this unit together with a wireless remote
controller, the air ow direction of the indoor unit may not
match the direction indicated on this unit.
3-2-1 VT Air Flow Direction
(1) Touch the [VT Setting] on the “Air Flow Direction Set-
ting” screen.
(2) “VT Air Flow Direction Setting ” screen is displayed. Touch
[ ] or [ ] and set the air ow direction or “Swing”.
(1) (2)
1 3
Air Flow Direction Setting
Back
VT HZ
Setting Setting
1
1
4
VT Air Flow Direction Setting
Cancel OK
(3) When the [OK] is touched after setting, the data is
transmitted to the indoor unit and the display returns to
the “ Air Flow Direction Setting” screen.
3-2-2 HZ Air Flow Direction
(1) Touch the [HZ Setting] on the “Air Flow Direction Set-
ting” screen.
(2) “
HZ Air Flow Direction Setting ” screen is displayed. Touch
[ ] or [ ] and set the air ow direction or “Swing”.
(1) (2)
1 3
Air Flow Direction Setting
Back
VT HZ
Setting Setting
1
3
5
HZ Air Flow Direction Setting
Cancel OK
(3) When the [OK] is touched, after the data is transmitted
to the indoor unit, the display returns to the “Air Flow
Direction Setting” screen.
3-2-3 Individual VT Hold
“Individual VT Hold” can be used only with cassette type in-
door unit which supports this function. The air ow direction
can be set for each outlet of single or multiple indoor units
connected to this remote controller.
(1) Touch the [Individual VT Hold] on the “Air Flow Direc-
tion Setting” screen.
(2) When multiple indoor units are connected to this remote con-
troller, the indoor unit selection screen is displayed. When only
one indoor unit is connected, the screen of (3) is displayed.
When the screen (2) has 2 pages, they can be switched
by touching the [Next Page] or [Previous Page]. When this
remote controller is connected to multiple indoor units, the
address (XX-XX) is displayed for each indoor unit. Touch the
indoor unit to be set. [
✓
] is displayed at the set indoor units.
(1) (2)
1
Air Flow Direction Setting
Back
Individual VT Hold
VT
Setting
01-01
01-05
01-02
01-06
01-03
01-07
01-04
01-08
Individual VT Hold Page 1/ 2
Back Reset
Next
Page
Unit 1
Unit 5
Unit 2
Unit 6
Unit 3
Unit 7
Unit 4
Unit 8
Notes
• To clear the air ow direction setting of all the displayed
indoor units, touch [Reset]. When [Yes] of the conr-
mation screen is touched, the setting is cleared and
switches to the air ow direction setting of “VT setting”
(Refer to 3-2-1).
• When you want to change the order of the indoor units
displayed on the indoor unit selection screen, consult
your installer or service personnel.
En-7
En-8