Fujitsu UTY-RNRT - Maintenance (for administrator)

(4) “Sensor Selection” screen is
displayed. This screen con-
tains up to 4 pages. Touch the
[Next Page] or [Previous Page]
to navigate pages.
Touch the sensor to associate.
Zone1
Page 1/ 4
Cancel OK
Next
Page
Sensor2
Sensor4
Sensor3
(5) Touch the [OK] on the “Sensor Selection” screen to
submit the data to the zone interface, and return to “Zone
Temp Sensor Selection” screen.
(6) Touch the [Back} on the “Zone
Temp Sensor Selection” to re-
turn to “Zone Setting” screen.
Back
Zone Temp Sensor Selection
Zone1
Zone3
Sensor3
Sensor2
Zone4
Zone2
Sensor2
Sensor4
Page 1/ 2
Next
Page
Zone Group Setting
(7) Touch the [Zone Group Set-
ting] on the “Zone Setting”
screen.
Back
Zone Setting
Zone Temp Sensor
Selection
Zone Group Setting
Sensor Name
Setting
Zone Name Setting
(8) “Zone Group Setting” screen
is displayed. Touch the group
to confi gure.
Back
Zone Group Setting
Day
Night
Group4Group3
(9) The zone group registration
screen is displayed. Touch the
item to confi gure.
Group3
Back
Zone Group Allocation
Zone Group Name Setting
Priority SenSor Setting
(10) Touch the [Zone Group Name
Setting] to display “Zone
Group Name Setting” screen.
Enter the name. Refer to “3-9-
3 R.C.Group Name Setting”.
Touch the [OK] to submit the
data to the zone interface,
and return to the zone group
registration screen.
Zone Group Name Setting
Cancel OK
Fixed
Phrase
UVW
XY
Z./
_–
ABC
DE
ABCDEFGHIJKL│
FGH
IJ
KLM
NO
0–9
SP BS
PQR
ST
(11) Touch the [Zone Group Alloca-
tion] to display “Zone Group
Allocation” screen.
Touch the zone to enable or
disable it.
Touch [OK] to submit the data
to the zone interface, and
return to the zone group regis-
tration screen.
Cancel OK
Zone7
Zone1
Zone4
Zone8
Zone5
Zone2
Zone6
Zone3
Zone Group Allocation
NOTES
• Besides the common zones, zones with outlet are
displayed.
• If no common zones are present, the following
screen is displayed when all zones are disabled.
Close
Zone Setting
Setting not perfomed. Always perform one setting.
(12) Touch the [Priority Sensor Set-
ting] to display “Priority Sensor
Setting” screen. This screen
contains up to 4 pages.
Touch the [Next Page] or [Pre-
vious Page] to navigate pages.
Touch the sensor to confi gure.
Touch [OK] to submit the data
to the zone interface, and
return to the zone group regis-
tration screen.
Priority Sensor
Page 1/ 4
Cancel OK
Next
Page
Sensor3
Sensor2
Sensor1
(13) Touch the [Back] to return to “Zone Group Setting”
screen.
(14) Touch the [Back] to return to “Zone Setting” screen.
(13) (14)
Group3
Back
Zone Group Allocation
Zone Group Name Setting
Priority SenSor Setting
Back
Zone Group Setting
Day
Night
Group4Group3
Zone Name Setting
(15) Touch the [Zone Name Set-
ting] on the “Zone Name Set-
ting” screen.
Back
Zone Setting
Zone Temp Sensor
Selection
Zone Group Setting
Sensor Name
Setting
Zone Name Setting
“Zone Name Setting” screen is
displayed. This screen con-
tains up to 3 pages Touch the
[Next Page] or [Previous Page]
to navigate pages.
Touch the zone to confi gure.
Zone1 [ LIVING ]
[ ABCDEFGHIJKL ]
[ -- ]
Zone2
Zone3
Zone Name Setting Page 1/ 4
Back
Next
Page
(16) Enter the name. Refer to “3-9-
3 R.C.Group Name Setting”.
Touch the [OK] to submit the
data to the zone interface, and
return to the “Zone Name Set-
ting” screen.
Zone2
Cancel OK
Fixed
Phrase
UVW
XY
Z./
_–
ABC
DE
ABCDEFGHIJKL│
FGH
IJ
KLM
NO
0–9
SP BS
PQR
ST
(17) Touch the [Back] to return to
“Zone Setting” screen.
Zone1 [ LIVING ]
[ ABCDEFGHIJKL ]
[ -- ]
Zone2
Zone3
Zone Name Setting Page 1/ 4
Back
Next
Page
En-22
9373329831-02OMEnUTY-RNRT.indd229373329831-02OMEnUTY-RNRT.indd22 2021/11/1913:23:042021/11/1913:23:04