Fujitsu UTY-RVRU - Specific Timer and Setting Screens; Operation Mode, Temperature, and Time Settings

3-2-4 Operation mode screen
(c)
(a)
(b)
(a) Operation mode menu
Select and tap a operation mode. Swipe up or down on
any hidden items.
NOTE
If set “3-2-7 Operation Setting screen” to “OFF”, do not
need to set this item.
(b) Cancel button
Taptodisplayaconrmationscreen.Tap[OK]onthe
conrmationscreentoreturntothepreviousscreen.
(c) OK button
Taptoconrmthesettingandreturntotheprevious
screen.
Whenthesettingsarechanged,aconrmationscreen
willbedisplayed.Tap[OK]ontheconrmationscreento
return to the previous screen.
3-2-5 Set Temp. screen
(c)
(a)
(b)
(a) Temperature setting button
Tap the button to set the temperature.
NOTES
• This item cannot be set when “FAN” mode is selected in
“3-2-4 Operation mode screen”.
• If set “3-2-7 Operation Setting screen” to “OFF”, do not
need to set this item.
(b) Cancel button
Taptodisplayaconrmationscreen.Tap[OK]onthe
conrmationscreentoreturntothepreviousscreen.
(c) OK button
Taptoconrmthesettingandreturntotheprevious
screen.
Whenthesettingsarechanged,aconrmationscreen
willbedisplayed.Tap[OK]ontheconrmationscreento
return to the previous screen.
3-2-6 Time screen
(c)
(a)
(b)
(a) Time setting button
When tap each item
of “Hour”, “Minute”
and “AM/PM”, each
selection screen is
displayed. Swipe up
or down to select an
item, and tap [
]
above the item to
conrm.
NOTE
The time format depends on the setting. Refer to “5-3-2-4
Time Format”.
(b) Cancel button
Taptodisplayaconrmationscreen.Tap[OK]onthe
conrmationscreentoreturntothepreviousscreen.
(c) OK button
Taptoconrmthesettingandreturntotheprevious
screen.
Whenthesettingsarechanged,aconrmationscreen
willbedisplayed.Tap[OK]ontheconrmationscreento
return to the previous screen.
En-9