Fujitsu UTY-RVRU - Timer and Setting Configurations; Auto Off Timer Settings

5 Setting
5-1
5-2
5-3
5-4
(a) (b)
(a) Backward button
Tap to return to the previous screen.
(b) Home button
Tap to move to the temperature setting screen (home
screen).
5-1 Timer
NOTE
Some items may not be displayed depending on the
model of the indoor unit or the settings of the controller.
3-2
5-1-1
5-1-2
(a) (b)
(a) Backward button
Tap to return to the previous screen.
(b) Home button
Tap to move to the temperature setting screen (home
screen).
5-1-1 AutoO󰀨Timer
When indoor unit operation is started by the Operation button
of this unit, operation stops after the set time.
5-1-1-1
5-1-1-2
5-1-1-3
(a) (b)
(c)
(a) Backward button
Tap to return to the previous screen.
(b) Home button
Tap to move to the temperature setting screen (home
screen).
(c) Clock
5-1-1-1 Operation Stop Time
Set the time from operation start to automatic stop.
(1) Swipe up or down to
select the stop time
and tap it.
Set in 10 minute
increments from 30
minutes to 240 min-
utes.
(2) Tap [
] to return to
the previous screen.
5-1-1-2 Time Range
(1) When specifying a
time range for the
“Auto Off Timer”, tap
[Range Spec.] and
when enabling the
setting all day, tap
[Continuous].
(2) Tap [
] to return to
the previous screen.
If selected [Range Spec.] here, specify the range in “5-1-1-3
Start/Stop Time”.
En-19