Fujitsu UTY-RVRU - Advanced Operation Settings; Operation Mode and Fan Speed Adjustment; Eco Away and Weekly Timer Functions

2-4 Operation mode setting
NOTE
The operation modes that can be set differ depending on
the indoor unit model, air conditioner system, and control-
ler settings.
(a)(b)
(a) Operation mode setting area
Swipe up or down to select the operation mode.
(b) Operation mode
The operation mode is displayed.
■
Operation mode icons
COOL
DRY
HEAT MINIMUM
HEAT
CUSTOM
AUTO
FAN
2-5 Fan speed setting
NOTE
The fan speed that can be set depends on the indoor unit
model, air conditioner system, or controller settings.
(a)(b)
(a) Fan speed setting area
Swipe up or down to set the fan speed.
[
] is AUTO.
(b) Fan speed
Displays the set fan speed.
3 Other settings
■
Other settings screen
3-1
4
3-2
5
3-1 Eco Away
When temporarily unattended, enable this function to oper-
ate at a preset temperature.
■
Start the Eco away operation
Tap the toggle button on the screen.
■
Stop the Eco away
operation
Tap [Cancel] on the message
screen.
Refer to “4-5-1 Eco Away
(setting)” for setting the
operating temperature while
away.
NOTES
• The timer will not work while Eco away is enable.
• Eco away cannot be used under the following condi-
tions.
-DuringoperationO󰀨
- During fan operation
- During minimum heat operation
- During antifreeze operation
3-2 Weekly Timer
3-2-1 Weekly timer screen
(d)
(c)
(e)
(a) (b)
En-7