Fujitsu UTY-RVRU - Initial System Settings; RC Group Name Configuration

5-2 Initial setting
NOTE
Some items may not be displayed depending on the
model of the indoor unit or the settings of the controller.
For each description, refer to the appropriate heading num-
ber.
♦:Forinstaller
5-2-1
5-2-2
5-2-3
5-2-4
5-2-5
5-2-6
♦
♦
♦
♦
♦
♦
♦
♦
(a) (b)
(c)
(a) Backward button
Tap to return to the previous screen.
(b) Home button
Tap to move to the temperature setting screen (home
screen).
(c) Back to top button
Tap to display the top of the scroll screen.
5-2-1 RC (Remote Controller) Group Name
The remote controller group name can be set or changed.
(a)
(b)
(c)
(d)
(e)
(f) (g) (h) (i)
(a) Cancel button
Taptodisplayaconrmationscreen.Tap[OK]tocancel
the settings and return to the previous screen.
(b) Input area
Up to 12 characters can be entered.
(c) Shift key
(d) Backspace key
(e) Enter key
(f) Phrase key
[Floor,Corridor,O󰀩ce,ConfRoom,ReceptRoom,
Room, Room No., Front, Side, Entrance, Outlet, East,
West, South, North, Window] are registered. Tap the
[Phrase] key until the sentence to be used is displayed.
NOTE
If tap the [Phrase key] during input, the input up to that
point will be deleted. If add characters to phrase, enter
phrase first.
(g) 123 key
Tap to display numbers and symbols. Tap again to re-
store.
(h) Space key
(i) Cursor keys
(1) After entering, tap [
] to
display the confirmation
screen.
(2) Tap [Close] to return to the
previous screen.
En-21