Fujitsu UTY-RVRU - Additional Energy Saving and Safety Features; Energy Saving Fan and Auto Return Settings; Cool;Dry or Heat Mode Specific Settings

4-3-3 Energy saving fan
When the set temperature is reached during cooling opera-
tion, the fan operates intermittently and power is saved.
(a)
(a) Toggle button
Tap to toggle enable/disable.
Enable
Disable
4-3-4 Set Temp. Auto Return
Even if the temperature setting is changed during Cool or
Heat mode operation, after the set time, the temperature
automatically returns to the set temperature.
(a)
4-3-4-1
(a) Toggle button
Tap to toggle enable/disable.
Enable
Disable
4-3-4-1 Set Temp. Auto Return (settings menu)
(a) (b)
4-3-4-2
(a) Backward button
Tap to return to the previous screen.
(b) Home button
Tap to move to the temperature setting screen (home
screen).
4-3-4-2 Cool/Dry or Heat (setting)
NOTE
The setting method for Cool/Dry and Heat is the same.
■
Example of the Cool/Dry screen
(d)
(c)
(e)
(g)(f)
(a) (b)
(a) Backward button
Tap to return to the previous screen.
(b) Home button
Tap to move to the temperature setting screen (home
screen).
(c) Return time setting
button
Tap to select a time
from the pull-down
menu. It can be set in
units of 10 minutes in
the range of 10 to 240
minutes.
To close the pull-
down menu, tap [
]
at the top.
(d) Return temperature setting button
Tap to set the return temperature. This setting is not nec-
essary if the return temperature is set to the weekly timer
setting.
(a) Schedule temperature toggle button
When enabled, the return temperature will be the weekly
timer setting. To use this function, need to set the weekly
timer.
Enable
Disable
(b) Cancel button
Taptodisplayaconrmationscreen.Tap[OK]onthe
conrmationscreentoreturntothepreviousscreen.
(c) OK button
Taptoconrmthesettingandreturntotheprevious
screen.
Whenthesettingsarechanged,aconrmationscreen
willbedisplayed.Tap[OK]ontheconrmationscreento
return to the previous screen.
En-16