Fujitsu UTY-RVRU - Away Mode and Vacation Settings; Cleaning and Maintenance Procedures; Panel Cleaning and Filter Sign Reset

4-5-2 Away
When operation stopped, it switches to indoor protection
operation.
NOTE
This function requires RC sensor to be enabled. Refer to
“5-2-6 RC (Remote Controller) Sensor”.
4-5-2-1
(a)
(a) Toggle button
Tap to toggle enable/disable.
Enable
Disable
4-5-2-1 Away (temperature setting)
Set the operating temperature when unattended.
(c)
(d)
(d)
(c)
(e)
(f)
(a) (b)
(a) Backward button
Tap to return to the previous screen.
(b) Home button
Tap to move to the temperature setting screen (home
screen).
(c) Temperature setting button
Tap to set the operating temperature.
(d) Toggle button
When “Cool” or “Heat” is not used, tap to set enable.
Enable
Disable
(e) Cancel button
Taptodisplayaconrmationscreen.Tap[OK]tocancel
the settings and return to the previous screen.
(f) OK button
Whenthesettingsarechanged,aconrmationscreen
willbedisplayed.Tap[OK]ontheconrmationscreento
return to the previous screen.
4-5-3 Vacation
This function disables the weekly timer when the machine is
left unattended for a long period of time, such as on vaca-
tion.
NOTE
Disable can also be set in the weekly timer setting. Refer
to “3-2 Weekly Timer”.
(a)
(a) Toggle button
Tap to toggle enable/disable.
Enable
Disable
4-6 Cleaning
4-6-1 Panel Cleaning
Operation is prohibited for 30 seconds to prevent erroneous
operation due to cleaning.
NOTE
When cleaning the touch screen panel, wipe with a soft
and dry cloth. Do not use water, harsh abrasive cleans-
ers, or volatile agents like benzene or thinner.
(a)
(a) Test Now button
When tap [Start], the display panel will not respond to
wiping for 30 seconds.
4-6-2 Filter Sign Reset
Aftercleaningthelter,resettheltersign.
(a)
(a) Reset button
Tap[Reset]toresettheltersign.
En-18