Full Spectrum Laser MUSE 3D - Section I. Safety

Technical Support is available 8am-5pm PST. Monday - Friday
support@fslaser.com • 702-802-3103
2
Water Inlet
Water Outlet
Power On/O
Power Supply
Air Inlet
Air Inlet
40/45 Watt Laser Tube
X-Gantry
Laser Head
Camera
Touch Screen
20” x 12” Engraving Area
Pause/Stop Button
Exhaust Fan / Flange
Cooling Vents
Ethernet Port
Honeycomb Tray
Back ViewSide View
Top View
Full Spectrum Laser Muse 3D Laser System
Congratulations on your purchase of a Full Spectrum Laser Muse 3D Laser System. With proper usage and
upkeep, your laser cutter should provide years of productive output. This user manual will guide you through
the safety guidelines and operation of your machine. It is recommended that you familiarize yourself with this
manual before using your laser cutter.
For more information and product selection, please visit www.fslaser.com
Compliance Statement The Full Spectrum Laser MUSE 3D Laser System is a class 3R laser product, as dened in International Standard IEC 608251.
The Full Spectrum Muse 3D complies with 21 CFR 1040.10 and 1040.11, the Federal Performance Standards for Light Emitting Products, except for
deviations pursuant to Laser Notice No. 50, dated July 16, 2001. The Center for Devices and Radiological Health of the US FDA issued Laser Notice
No. 50 to permit manufacturers to classify and manufacture their products in accordance with the International Standard. 21 CFR 1040 and IEC 608251
require that certication, identication and warning labels be placed on laser products. Reproductions of the labels found on the Full Spectrum Hobby
Advanced Laser System follow, with locations specied: