Full Spectrum Laser MUSE 3D - Tools Screens

Technical Support is available 8am-5pm PST. Monday - Friday
support@fslaser.com • 702-802-3103
40
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
44
Tools Screens
Figure 5.8
MAIN TOOLS SCREEN
About: Opens Tools sub-screen.
Factory
Reset: Resets to factory settings.
Camera Calibration: Begin camera
calibration process.
Figure 5.9
ABOUT SUB-SCREEN
Model: Indicates Laser Model.
Firmware Version: Current Version
of Touchscreen
Wireless MAC: MAC wireless
Information.
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
44
Tools Screens
Figure 5.8
MAIN TOOLS SCREEN
About: Opens Tools sub-screen.
Factory
Reset: Resets to factory settings.
Camera Calibration: Begin camera
calibration process.
Figure 5.9
ABOUT SUB-SCREEN
Model: Indicates Laser Model.
Firmware Version: Current Version
of Touchscreen
Wireless MAC: MAC wireless
Information.
Section V. Touch Screen Interface
Tools Screens
Main Tools Screen
Search: Opens History Options.
Delete: Delete Project from History.
Run Perimeter: Laser automatically JOGS the extent of the current project’s border.
Start: Run selected Project.
About Sub-Screen
Model: Indicates Laser Model.
Firmware Version: Current Version of Touchscreen
Wireless MAC: MAC wireless Information.
Main Tools Screen About Sub-Screen