Full Spectrum Laser MUSE 3D - Page 44

RetinaEngrave v3.0 Software
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
47
SECTION VI. SOFTWARE
Using RetinaEngrave v3.0 Software
In this section you will be introduced to the major interface features of RetinaEngrave
v3.0.
Figure 6.1
Technical Support is available 8am-5pm PST. Monday - Friday
support@fslaser.com • 702-802-3103
43
Cut (Ctrl+X): Selected object or item is removed.
Copy (Ctrl+C): Copy some portion of an object or item.
Paste (Ctrl+V): Paste a copied or cut portion of an object or item.
Delete (Del): Delete selected object or item.
Paste In Place (Shift+Ctrl+V): Paste a copied object or item in same location.
Paste Inside Selection: Paste a copied object or item inside selected area.
Paste Style (F4): Paste and match style.
Duplicate (Ctrl+D): Create a copy of a selected object.
Clone (Shift+Ctrl+D): Create an exact copy or ‘clone’ of an object.
Select All (Ctrl+A): Select all items in work screen.
Deselect All (Shift+Ctrl+D): All items in work screen are deselected.
Invert Selection (Ctrl+I): Items previously selected are now unselected and items unselected are selected.
Select by Font Type: Select item by font type.
Settings: Displays settings menu.
Materials...
Activate user proles
Modify
Arrange
Send to Front (Shift+Ctrl+Up): Send an object to the front layer.
Bring Forward (Ctrl+Up): Send an object one layer forward.
Send Backward (Ctrl+Down): Send an object one layer backwards.
Send to Back (Shift+Ctrl+Down): Send an object to the back layer.
Align
Align Left: Align object to the left.
Align Center: Align object to center.
Align Right: Align object to right.
Align Top: Align object to top.
Align Middle: Align object to middle.
Align Bottom: Align object to bottom.
Same Width: All selected objects convert to same width.
Same Height: All selected objects convert to the same height.
Distribute Horizontally: Evenly arrange selected objects horizontally.
Distribute Vertically: Evenly arrange selected objects vertically.
Snap to Full Units: Snap to grid as full units.
Snap to Half Units: Snap to grid as half units.
Transform
Rotate 45° Left: Rotate selected object left 45°.
Rotate 90° Left: Rotate selected object left 90°.
Edit (Continued)