RetinaEngrave v3.0 Software
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
SECTION VI. SOFTWARE
Using RetinaEngrave v3.0 Software
In this section you will be introduced to the major interface features of RetinaEngrave
v3.0.
Figure 6.1
Technical Support is available 8am-5pm PST. Monday - Friday
support@fslaser.com • 702-802-3103
52
Indicators (Bottom Row) (E)
Position Indicator: Displays current position of the laser on the grid.
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
Raster Properties Window
Halftone Dither: Apply Halftone Dither.
Threshold: Apply Threshold.
Blur: Adjust blur filter radius from 0 to 30.
Edge: Adjust edge enhancement threshold from 0 to 30.
Intensity: Adjust intensity from -255 to 255.
Invert: Reverse Black and White elements.
Resolution: Set resolution (250, 500, 1000 dpi).
Poser %: Select power percentage from 1 to 100.
Speed%: Select speed percentage from 1 to 100.
B/W Threshold: Select black and white threshold from 0 to
255.
Indicators (Bottom Row)
Position Indicator: Displays current position of the laser on the grid.
Time Remaining Indicator: Displays the time remaining to complete the current job
Status Indicator: Displays whether laser is ready to initiate a job or is currently executing a job.
Sync Indicator:
Machine Indicators: Displays information on connected devices.
Device Connection Available:
Lid Indicator: Tells operator if lid is open or closed.
Water Flow Indicator: Tells operator if water is flowing through the laser tube or not.
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
Raster Properties Window
Halftone Dither: Apply Halftone Dither.
Threshold: Apply Threshold.
Blur: Adjust blur filter radius from 0 to 30.
Edge: Adjust edge enhancement threshold from 0 to 30.
Intensity: Adjust intensity from -255 to 255.
Invert: Reverse Black and White elements.
Resolution: Set resolution (250, 500, 1000 dpi).
Poser %: Select power percentage from 1 to 100.
Speed%: Select speed percentage from 1 to 100.
B/W Threshold: Select black and white threshold from 0 to
255.
Indicators (Bottom Row)
Position Indicator: Displays current position of the laser on the grid.
Time Remaining Indicator: Displays the time remaining to complete the current job
Status Indicator: Displays whether laser is ready to initiate a job or is currently executing a job.
Sync Indicator:
Machine Indicators: Displays information on connected devices.
Device Connection Available:
Lid Indicator: Tells operator if lid is open or closed.
Water Flow Indicator: Tells operator if water is flowing through the laser tube or not.
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
Raster Properties Window
Halftone Dither: Apply Halftone Dither.
Threshold: Apply Threshold.
Blur: Adjust blur filter radius from 0 to 30.
Edge: Adjust edge enhancement threshold from 0 to 30.
Intensity: Adjust intensity from -255 to 255.
Invert: Reverse Black and White elements.
Resolution: Set resolution (250, 500, 1000 dpi).
Poser %: Select power percentage from 1 to 100.
Speed%: Select speed percentage from 1 to 100.
B/W Threshold: Select black and white threshold from 0 to
255.
Indicators (Bottom Row)
Position Indicator: Displays current position of the laser on the grid.
Time Remaining Indicator: Displays the time remaining to complete the current job
Status Indicator: Displays whether laser is ready to initiate a job or is currently executing a job.
Sync Indicator:
Machine Indicators: Displays information on connected devices.
Device Connection Available:
Lid Indicator: Tells operator if lid is open or closed.
Water Flow Indicator: Tells operator if water is flowing through the laser tube or not.
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
Raster Properties Window
Halftone Dither: Apply Halftone Dither.
Threshold: Apply Threshold.
Blur: Adjust blur filter radius from 0 to 30.
Edge: Adjust edge enhancement threshold from 0 to 30.
Intensity: Adjust intensity from -255 to 255.
Invert: Reverse Black and White elements.
Resolution: Set resolution (250, 500, 1000 dpi).
Poser %: Select power percentage from 1 to 100.
Speed%: Select speed percentage from 1 to 100.
B/W Threshold: Select black and white threshold from 0 to
255.
Indicators (Bottom Row)
Position Indicator: Displays current position of the laser on the grid.
Time Remaining Indicator: Displays the time remaining to complete the current job
Status Indicator: Displays whether laser is ready to initiate a job or is currently executing a job.
Sync Indicator:
Machine Indicators: Displays information on connected devices.
Device Connection Available:
Lid Indicator: Tells operator if lid is open or closed.
Water Flow Indicator: Tells operator if water is flowing through the laser tube or not.
Technical Support is available from 8am to 5pm (PST) M - F at support@fslaser.com.
Raster Properties Window
Halftone Dither: Apply Halftone Dither.
Threshold: Apply Threshold.
Blur: Adjust blur filter radius from 0 to 30.
Edge: Adjust edge enhancement threshold from 0 to 30.
Intensity: Adjust intensity from -255 to 255.
Invert: Reverse Black and White elements.
Resolution: Set resolution (250, 500, 1000 dpi).
Poser %: Select power percentage from 1 to 100.
Speed%: Select speed percentage from 1 to 100.
B/W Threshold: Select black and white threshold from 0 to
255.
Indicators (Bottom Row)
Position Indicator: Displays current position of the laser on the grid.
Time Remaining Indicator: Displays the time remaining to complete the current job
Status Indicator: Displays whether laser is ready to initiate a job or is currently executing a job.
Sync Indicator:
Machine Indicators: Displays information on connected devices.
Device Connection Available:
Lid Indicator: Tells operator if lid is open or closed.
Water Flow Indicator: Tells operator if water is flowing through the laser tube or not.
Time Remaining Indicator: Displays the time remaining to complete the current job
Status Indicator: Displays whether laser is ready to initiate a job or is currently executing a job.
Sync Indicator: Noties you of the last workspace update operation results. “Press Sync” to sync immediately. The workspace
will update automatically, periodically.
Machine Indicators: Displays information on connected devices.
Device Connection Available: Indicates connection to machine is successful.
Jog Controls (J)
Video Feed (I)
Use this window to view realtime display.
This tool is for moving the culminator and
camera along the Z-Axis (up and down)
To Next Page
Loading...