Admin page
Setting up administration rights and configure basic features, update firmware
Wi-Client
Option to block the bridging
funktion of the Wi-Client. This
could be useful when the Wi-Client
only works as a serial client
adapter. The configuration via
LAN-Interface is not blocked with
this option.
Enable more configuration options:
IP Config over UDP 41233:
assignment of an IP-Address over
the LAN-Interface (special
function).
Telnet-Config:
Configuration
option via an telnet server socket
(TCP-Port 23).
disable wireless config:
for
security reasons it is possible to
prevent the configuration via
WLAN.
Enter user name and password to
protect the
Wi-Client from unauthorized
access
IP address:
By selecting “DHCP” the Wi-Client
is assigned the IP address from a
DHCP server on the network.
By selecting “Static” the IP
address is fixed. In this case the
network mask has to be definded
and possibly the default gateway.
Device name:
This is a name to identify the Wi-
Client by external configuration
and IP address lookup programs,
i.e. the locator program.
This is not the SSID
Select firmware file
Restore the Wi-Client
configuration to default values
Reboot the Wi-Client
Upload firmware to Wi-Client
Illustration 9: Administration page
WI-Client Manual Version 2.16 V3 12
To Next Page
Loading...