User Manual Installation instructions
Handheld focX®2
1405.150.10001.BH.EN.8 | 1.0.0 17 | 32
5 Installation instructions
5.1 Scope of delivery
IMPORTANT
Check the delivery to ensure it is complete.
The scope of delivery includes:
Handheld
Power supply unit
USB-C cable
Multi-country adapter
Headset
Screwdriver
5.2 Insert SIM cards and micro SD card
The SIM card is not included in the scope of delivery.
The SIM card slot is located on the rear side of the device.
1. Undo the fixing screws (2x) on the battery cover
with the enclosed screwdrivers .
Turn the screws anti-clockwise.
2. Remove the battery cover.
3. Remove the battery.
4. Insert the card(s), with the contacts facing
downwards, into the card holder.
SIM slot 1: 2G/3/4G
SIM slot 2: GSM-R
The cut-off edge of the SIM card must fit
into the cut edge of the holder.
5. Insert the micros SD card with the
contacts facing downwards, into the card
holder.
6. Replace the battery.
7. Close the battery cover.
8. Tighten the fixing screws (2x) on the battery cover
with the enclosed screwdrivers.
Turn the screws anti-clockwise.
SIM slot 1:
2G/3/4G
SD card
To Next Page
Loading...
General