Funn FUNNDAMENTAL PEDALS - Page 7

WWW.FUNNMTB.COM
TAIPAN PEDALS 2024.04.15 / REV. 0
WWW.FUNNMTB.COM
BEARING / Axle Replacement
step 7 :
step 8 :
Push and screw the bushing remover tool into the bushing within the pedal body. Once
the remover is fully engaged with the bushing, pull it out to remove the bushing.
To extract the bushing from the pedal body, secure the pedal body in a vise. It's advisable
to place a cloth between the pedal body and the vise to protect the pedal's surface.
FUUNDAMENTAL PEDALS
FUNNDAMENTAL PEDALS 2024.04.23 / REV. 0
05