How to troubleshoot Furrion LED TV that does not turn on?
If your Furrion LED TV isn't turning on, here are a few things to try: * First, make sure the power cord is securely plugged into the outlet. * If it is, try a different AC outlet to rule out a faulty outlet. * Check your fuse or circuit breaker to ensure power is being supplied to the TV. * As a last resort, unplug the TV for an hour, and then plug it back in to see if it resets.
Why Furrion FEHS28CAA LED TV remote control does not work?
If your Furrion LED TV remote isn't working, try these steps: * Ensure the remote is within range and there are no obstructions blocking the signal to the TV. * Check the batteries in the remote and replace them if necessary. * Make sure the remote is set to the correct operating mode (TV, VCR, etc.).
What to do if Furrion LED TV has picture but no sound?
If you're getting a picture but no sound on your Furrion LED TV, here's what you can do: * First, check the volume settings to make sure the volume isn't set too low or muted. * If the sound is muted, press the MUTE button to unmute it. * Try changing to another channel to see if the issue is specific to one channel. * Check the audio cable connections to ensure they are properly connected.
Why Furrion LED TV has poor picture quality?
If your Furrion LED TV has poor picture quality or no picture, try the following: * Tune to another station to rule out issues with the current broadcast. * Make sure channels are properly set into the memory. * Check the antenna or cable TV connections and adjust the antenna if needed. * Look for any potential sources of interference. * Check the picture control adjustments.
What causes poor sound on Furrion LED TV?
If your Furrion LED TV is experiencing poor sound quality or no sound, consider the following: * Tune to another station to rule out any issues with the current broadcast or cable TV signal. * Check the sound adjustments, including volume and mute settings. * Identify and eliminate any potential sources of interference that might be affecting the audio.
How to improve Furrion FEHS28CAA reception?
To improve poor TV reception on your Furrion LED TV, try these steps: 1. If you're using an antenna, ensure the antenna amplifier is turned on. 2. Adjust the antenna position to find a stronger signal. 3. Check that the antenna connection is securely attached to the TV. 4. Verify that the antenna distribution box is receiving power. 5. Make sure your incoming cable is connected to the correct cable/antenna wall connection inside your RV. 6. Ensure the internal RV coax jump cable is connected to the correct port.
How to fix poor Cable/Satellite TV reception on Furrion FEHS28CAA?
To improve poor cable or satellite TV reception on your Furrion LED TV, try the following: * Ensure the antenna amplifier is turned off for cable signal. * Ensure the incoming cable is correctly connected to your RV. * Ensure the cable splitter box has power. * Ensure the incoming cable is connected to the correct cable/satellite wall connection inside your RV. * Ensure the internal RV coax jump cable is connected to the correct port. * Ensure the satellite dish has no obstructions.
Why does my Furrion FEHS28CAA LED TV keep shutting off?
If your Furrion LED TV keeps shutting off, it might be due to: * The Sleep Timer being activated. * An interruption in the power supply.
Why Furrion FEHS28CAA shows black and white image from AV device?
If you're seeing a black and white image from a connected AV device on your Furrion LED TV, try these solutions: * Check the video connections on both the TV and the connected AV device. Ensure the colors match between the connectors and sockets: green (Y), blue (Pb/Cb), and red (Pr/Cr) for component connection, and yellow (VIDEO) for composite connection. * Ensure all video cables are firmly connected.
General| Display Technology | LED |
|---|---|
| Refresh Rate | 60Hz |
| HDMI Ports | 2 |
| USB Ports | 1 |
| Power Consumption | 45W |
| Aspect Ratio | 16:9 |
| Built-in Speakers | Yes |
| Screen Size | 28 inches |
| Resolution | 1366 x 768 |
| Backlight | LED |
Covers essential safety rules for operating the television, including water, cleaning, ventilation, heat, plugs, cords, and servicing.
Continues safety advice on outlets, objects, antenna grounding, parts, service, connections, volume, sound, and batteries, plus condensation advice.
Instructions for installing AAA batteries in the remote control, including usage tips and safety precautions.
Details the layout and functions of the remote control buttons and provides a detailed explanation of each button.
Advises consulting a professional for wall mounting and specifies VESA hardware requirements.
Explains HDMI CEC setup for auto standby, auto TV on, ARC functions, and controlling connected devices.
Details CEC options like Auto Standby, Auto TV On, ARC, Device Control, and Device List for connected devices.
To Next Page
