To Next Page
E
Edward FaulknerJul 26, 2025
Why is my Furrion Controller battery not fully charged?
- Bbradley53Jul 26, 2025
There are several reasons why your Furrion Controller battery might not be fully charged. It could be due to too much load connected to the battery; in this case, remove some loads. The battery temperature might be too low, so use the battery temperature sensor. The battery type setting could be incorrect; choose the correct battery type by pressing the Battery Selection button. The battery cable might be too small; use a larger gauge battery cable to reduce voltage drops. Finally, there might be too little sun to power the solar array; if applicable, reposition the vehicle.
General
