EasyManuals Logo

Furrion FURRIONNET-ZERO FSCC60PWM-BL User Manual

Furrion FURRIONNET-ZERO FSCC60PWM-BL
53 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #4 background imageLoading...
Page #4 background image
3
Important Safety Instructions
English
IMPORTANT: SAVE THESE INSTRUCTIONS–
This manual contains important instructions
for Models FSCC30PW-BL and FSCC60PW-
BL that shall be followed during installation
and operation of the charge controller. The
following symbols are used throughout the
manual to indicate potentially dangerous
conditions or important safety information.
WARNING
Indicates a potentially dangerous condition. Use
extreme caution when performing this task.
CAUTION
Indicates a critical procedure for safe and
proper operation of the controller.
NOTE: Indicates a procedure or function that
is important to the safe and proper operation
of the controller.
General Safety Precautions
Read all instructions and warnings in the
manual before installation.
There are no user serviceable
components inside of the controller. DO
NOT disassemble or attempt to repair the
controller.
Mount the controller indoors. Prevent
exposure to the elements and do not
allow water to enter the controller.
Install the controller in a well ventilated
area as the unit may become hot during
normal operation.
Install appropriate external fuses or
circuit breakers.
Disconnect or turn off all connections
with the solar panels and the fuses
or circuit breakers prior to controller
installation or adjustment.
Ensure connections remain tight to avoid
excessive heat.
Charge Controller Safety
NEVER connect the solar panel array
to the controller without connecting a
battery to the controller first.
Ensure input voltage does not exceed 130
VDC (FSCC60PW-BL) /70VDC(FSCC30PW-
BL) to prevent permanent damage. Use
the Open Circuit (Voc) to make sure the
voltage does not exceed this value when
connecting panels together.
Battery Safety
For use with sealed lead acid, AGM
(absorbent glass mat), and LiFePO4
batteries.
Explosive battery gases may be released
while charging. Be certain there is
enough ventilation to release the gases.
Use care when working with lead acid
batteries. Wear eye protection and have
fresh water available in case there is
contact with the battery acid.
Carefully read battery manuals before
operation.
Do NOT let the positive (+) and negative (-)
terminals of the battery touch each other.
Properly dispose of battery when
replaced.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Furrion FURRIONNET-ZERO FSCC60PWM-BL and is the answer not in the manual?

Furrion FURRIONNET-ZERO FSCC60PWM-BL Specifications

General IconGeneral
BrandFurrion
ModelFURRIONNET-ZERO FSCC60PWM-BL
CategoryController
LanguageEnglish

Related product manuals