Furrion FURRIONNET-ZERO FSCC60PWM-BL User Manual

53 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

MPPT Solar Charge Controller

Régulateur de charge solaire MPPT

Controlador de carga solar MPPT

* Picture shown here is for reference only.

L'image montrée ici est pour référence seulement.

La imagen que se muestra aquí es sólo para referencia.

Model/Modèle/Modelo:

FSCC30PW-BL, FSCC60PW-BL

FSCC30PWB-BL=FSCC30PW-BL+FSCC60PWM-BL

FSCC60PWB-BL=FSCC60PW-BL+FSCC60PWM-BL

Instruction Manual

Manuel d'instructions

Manual de instrucciones

Table of Contents

Questions and Answers:

E
Edward FaulknerJul 26, 2025
Why is my Furrion Controller battery not fully charged?
- B
  bradley53Jul 26, 2025
  There are several reasons why your Furrion Controller battery might not be fully charged. It could be due to too much load connected to the battery; in this case, remove some loads. The battery temperature might be too low, so use the battery temperature sensor. The battery type setting could be incorrect; choose the correct battery type by pressing the Battery Selection button. The battery cable might be too small; use a larger gauge battery cable to reduce voltage drops. Finally, there might be too little sun to power the solar array; if applicable, reposition the vehicle.
L
Lauren BlankenshipAug 10, 2025
What to do if the Fault LED is red on my Furrion Controller?
- M
  marc59Aug 10, 2025
  If the Fault LED on your Furrion Controller is red, it indicates a problem. This could be due to reversed battery polarity, so check the battery connection and correct it if needed. It might also indicate PV reverse, so check the PV input connection and correct it if necessary. Another cause could be battery overcharge, so check the condition of the battery and replace it if necessary. Lastly, it could mean the battery is disconnected; check the connection between the battery and the charger, and reconnect it if necessary.

Furrion FURRIONNET-ZERO FSCC60PWM-BL Specifications

General

Model	FURRIONNET-ZERO FSCC60PWM-BL
Category	Controller
Type	PWM Solar Charge Controller
Max. Charging Current	60 A
Max Current	60 A
Protection Features	Overcharge, Over-discharge, Overload, Short Circuit, Reverse Polarity
System Voltage	12V/24V Auto
Operating Temperature	-25°C to +55°C

Summary

Important Safety Instructions

General Safety Precautions

General safety guidelines for installation and operation of the controller.

Charge Controller Safety

Specific safety precautions related to the operation of the charge controller.

Battery Safety

Essential safety guidelines for handling and connecting batteries.

Installation

MPPT Solar Charge Controller Installation

Step-by-step guide for physically installing the MPPT controller unit.

PV Wire Size

Battery Cable Size

Wire and Cable Size

Operation

LED Indicators

Battery Selection Button

Protection

PV Over Current

Controller limits input power to 300W or 600W to prevent damage.

PV Short Circuit

Controller stops charging when a PV short circuit occurs.

PV Reverse Polarity

Protection against connecting PV leads in the reverse order.

Battery Reverse Polarity

Protection against connecting battery leads in the reverse order.

Battery Over voltage

Controller stops charging to protect the battery from overvoltage.

Controller Overheating

Care and Maintenance

Inspection and Maintenance Tasks

Specifications

Model Specifications

Troubleshooting

Faults and Possible Reasons

Related product manuals

FURRIONNET-ZERO FSCC60PW-BL

Preview: FURRIONNET-ZERO FSCC30PW-BL

FURRIONNET-ZERO FSCC30PW-BL

Preview: Furrion FSCC40PW2

Furrion FSCC40PW2

Furrion FSCC60PW2

Preview: Furrion FACC10SA-BL

Furrion FACC10SA-BL

Preview: Furrion NET-ZERO FSCC30PW-BL

Furrion NET-ZERO FSCC30PW-BL