3-3
11. Choose appropriate item and then press the EDIT soft key. One of the following displays
appears depending on your selection.
DEVICE NUMBER
¡
1 (IP:172.031.003.001)
¤
2 (IP:172.031.003.002)
¡
3 (IP:172.031.003.003)
¡
4 (IP:172.031.003.004)
RADAR SOURCE
¡
1 (IP:172.031.003.001)
¤
2 (IP:172.031.003.002)
¡
3 (IP:172.031.003.003)
¡
4 (IP:172.031.003.004)
¡
NO CONNECT
SOUNDER SOURCE
¡
ETR0 (IP:172.031.092.001)
¤
ETR1 (IP:172.031.092.011)
¡
ETR2 (IP:172.031.092.012)
¡
ETR3 (IP:172.031.092.013)
¡
ETR4 (IP:172.031.092.014)
¡
ETR5 (IP:172.031.092.015)
¡
ETR6 (IP:172.031.092.016)
¡
ETR7 (IP:172.031.092.017)
¡
ETR8 (IP:172.031.092.018)
¡
ETR9 (IP:172.031.092.019)
¡
OFF
AUX SOURCE
¤
AUX1 (IP:172.031.008.001)
¡
AUX2 (IP:172.031.008.002)
¡
AUX3 (IP:172.031.008.003)
¡
AUX4 (IP:172.031.008.004)
¡
OFF
▲
▼
▲
▼
▲
▼
▲
▼
12. Choose appropriate setting and then press the ENTER soft key.
13. After choosing ALL sources, press the NEXT soft key, and the RADAR SETUP menu
appears. If you do not have a radar installed, go to step 33.
ANTENNA TYPE A
HEADING DATA MAGNETIC
ANTENNA ROTATION ROTATE
RADAR OPTIMIZATION OFF
TIMING ADJUST OFF
M. B. SUPRRESSION OFF
RADAR ANTENNA HEIGHT MEDIUM (3-10m, 10-33ft)
STC CURVE MEDIUM
MONITOR MODE OFF
HEADING ADJUST OFF
Installation wizard, radar setup
14. Choose ANTENNA TYPE and then press the EDIT soft key.
ANTENNA TYPE
▲
¡
A (MODEL 1824C)
¤
B (MODEL 1834C)
¡
C (MODEL 1934C)
¡
D (MODEL 1944C)
¡
E (MODEL 1954C)
¡
F (MODEL 1964C)
▼
15. Choose the appropriate antenna type and then press the ENTER soft key.
To Next Page
Loading...
