To Next Page
Z
Zoe LeeJul 29, 2025
What to do if the Furuno COLOR VIDEO PLOTTER 1833C fuse blows?
- EeshortJul 30, 2025
If the fuse blows, determine the cause before replacing the fuse.
What to do if the Furuno COLOR VIDEO PLOTTER 1833C fuse blows?
If the fuse blows, determine the cause before replacing the fuse.
How to fix Furuno COLOR VIDEO PLOTTER 1833C cursor that skips or moves abnormally?
If the cursor skips or moves abnormally, clean the trackball.
What to do if Furuno COLOR VIDEO PLOTTER 1833C shows low battery voltage?
If the battery voltage is low, contact your dealer to request a battery replacement.
How to clean Furuno COLOR VIDEO PLOTTER 1833C Marine Radar LCD?
To clean the LCD, wipe it lightly with a soft cloth to remove dust.
How to fix loose display unit connectors on Furuno Marine Radar?
If the display unit connectors are loose, tighten them.
How to maintain the ground terminal on Furuno COLOR VIDEO PLOTTER 1833C?
Clean or replace the ground wire as necessary.
General| Brand | Furuno |
|---|---|
| Model | COLOR VIDEO PLOTTER 1833C |
| Category | Marine Radar |
| Language | English |
Warnings about electrical shock hazards and precautions for handling the equipment.
Warnings about RF radiation hazards from the radar antenna and safety measures.
Overview of the display unit controls, including keys, trackball, and ENTER knob.
Description of the radar display elements and their meanings.
Explanation of how to adjust the radar's gain sensitivity for optimal signal display.
Methods for reducing sea clutter using the A/C SEA control.
Procedures for reducing precipitation clutter using the A/C RAIN control.
How to set guard zones for target alarms and receive audio/visual alerts.
Information on entering, editing, and managing waypoints.
Information on creating, connecting, and managing routes.
How to navigate to destinations using quick points, waypoints, port services, and routes.
Overview of plotter alarms including arrival, anchor watch, XTE, proximity, speed, trip, temperature, and bottom alarms.
Overview of sounder alarms: bottom, fish, and water temperature.
How to set up common functions like language, units, and data sources.
How to customize radar display settings for operational needs.
How to set up the plotter display, including navigation options.
How to set up digital charts, including offsetting and attribute display.
How to select and display navigation data in data boxes.
How to arrange user-defined hot pages for quick access to displays.
How to select the connected navigator and configure navigation data.
How to customize network sounder settings like fish alarm and sensors.
How to format and manage data on memory cards.
How to transfer data (waypoints, routes, marks, lines) between the unit and a PC.
Guide for basic troubleshooting procedures to restore normal operation.
Procedures for testing equipment components like memory, GPS, and sounder.
List of error messages and their corresponding remedies.
