Furuno COLOR VIDEO PLOTTER 1833C - Navigating to Ports, Port Services

3. PLOTTER OPERATION
3-46
3.10.3 Navigating to ports, port services (NavCharts
™ only)
NavCharts™ have a port service list which shows services available at ports or
harbors. (See page 3-13.) You can use the list to set your destination as follows:
1. Select “35 PTS/PORT SVC” following the procedure in “Selecting quick point
entry method” on page 3-44.
2. Place the cursor on the location desired, then press the GOTO soft key. Soft
key titles change as in the figure below.
FROM
OS
0.26 nm
180.2°M
PUNTA CORNACCHIA
ACCO AMENO
I. ISCHIA
CASAMICCIOLA
ISCHIA
PORTO
40°45.971'N
13°57.462'E
+
QUICK
ROUTE
NEAR
SRVC
PORT
CANCEL
GOTO
GOTO
16.0nm
Plotter display
3. Press the PORT or NEAR SRVC soft key depending on objective. PORT
shows a list of ports in your area. NEAR SRVC displays the port service list.
¤
¡
¡
¡
¡




¡
¡
¡

▼
PORT & SERVICE
SELECT PORT & SRVC
ACCIAROLI
ACQUAMORTA
AGNONE S. NICOLA
AGROPOLI
AMALFI
BAIA
CAPRI
CASA MICCIOLA-ISCHIA
▲
Port services
Port list (Italy)
Port services and sample port list