Furuno COLOR VIDEO PLOTTER 1833C User Manual

3. PLOTTER OPERATION
3-36
3.9 Routes
Often a trip from one place to another involves several course changes,
requiring a series of route points (waypoints) which you navigate to, one after
another. The sequence of waypoints leading to the ultimate destination is called
a route. Your unit can automatically advance to the next waypoint on a route, so
you do not have to change the destination waypoint repeatedly.
You can store up to 200 routes, and a route may have 35 waypoints.
3.9.1 Creating routes
Entering a route with existing waypoints
This method constructs routes by using existing waypoints.
1. Press the [MENU] key.
2. Press the WAYPOINTS/ROUTES soft key.
3. Press the ROUTES soft key to open the ROUTE menu. (No data will be
shown if there are no routes entered.)
ROUTE
GOTO
NEW
ROUTE
EDIT
ROUTE
ERASE
ROUTE
RETURN
Route name
Total length of route
Number of waypoints
in route
▲
001
WAYPOINTS
35
LENGTH
25.6 nm
002
WAYPOINTS
2
LENGTH
56.7 nm
003
WAYPOINTS
3
LENGTH
21.1 nm
004
WAYPOINTS
3
LENGTH
21.1 nm
PUSH ENTER KNOB TO
SEARCH FOR
---
Route menu

Furuno COLOR VIDEO PLOTTER 1833C Specifications

General

Brand	Furuno
Model	COLOR VIDEO PLOTTER 1833C
Category	Marine Radar
Language	English