Furuno COLOR VIDEO PLOTTER 1833C User Manual

3. PLOTTER OPERATION
3-47
4. If you selected PORT at step 3, use the trackball to select a port, then press
the ENTER soft key. Make a route using the soft keys, then push the
[ENTER] knob. (If you want to go directly to that port, simply press the ADD
QP soft key followed by the [ENTER] knob.)
If you selected NEAR SRVC at step 3, select service mark desired with the
trackball and then push the ENTER soft key or the [ENTER] knob. Then, the
display shows the locations of those services nearest you. (The figure below
shows the location of filling stations in an area in southern Italy.) Use the
trackball to place the “hand cursor” on the port service icon desired, then
press the ENTER soft key. Make a route using the soft keys, then push the
[ENTER] knob. (If you want to go directly to location selected, simply press
the ADD QP soft key followed by pushing the [ENTER] knob.)
FROM
OS
0.26 nm
180.2°M
PUNTA CORNACCHIA
ACCO AMENO
I. ISCHIA
CASAMICCIOLA
ISCHIA
PORTO
40°45.971'N
13°57.462'E
+
ENTER
CANCEL
GOTO
GOTO
16.0nm
Sample filling station locations (southern Italy)

Furuno COLOR VIDEO PLOTTER 1833C Specifications

General

Brand	Furuno
Model	COLOR VIDEO PLOTTER 1833C
Category	Marine Radar
Language	English