Furuno 1824C User Manual

5-1
5. AIS OPERATION
Connected to an AIS Interface, your NavNet unit can show the name, position and other
nav data of AIS transponder equipped ships.
5.1 Turning AIS Feature On/Off
1. Press the MENU key to display the main menu.
2. Press the SYSTEM CONFIGURATION soft key.
3. Press the GENERAL SETUP soft key.
GENERAL
SETUP1
EDIT
AIS
OPTION
RETURN
KEY BEEP ON
LANGUAGE ENGLISH
RANGE UNIT nm, kt
TEMPERATURE UNIT
° F
DEPTH UNIT ft
WIND UNIT ft
WIND DATA APPARENT
SPEED AVERAGING 60 seconds
LOCAL TIME OFFSET 9H 0m
RESET TRIP LOG NO
TIME OUT DISP. SETTING 15 seconds
SAVE MOB KEY FUNCTION SAVE SHIP
START UP PICTURE DEFAULT
NEXT
PAGE
DST
ON/OFF
GENERAL SETUP menu, page 1
4. Press the AIS OPTION soft key to show the AIS OPTION menu. (The AIS OPTION soft
key is shown in grey unless the AIS Interface Unit or FURUNO FA-150 AIS Transponder
is connected.)
AIS
OPTION
EDIT
RETURN
AIS DISPLAY MODE OFF
THE NUMBER OF AIS TARGET 100
PROXIMITY ALARM OFF
CPA OFF
TCPA OFF
VECTOR TIME 30 minutes
VECTOR MODE TRUE
HISTORY INTERVAL 30 seconds
AIS OPTION menu
5. Choose AIS DISPLAY MODE and press the EDIT soft key.

Furuno 1824C Specifications

General

Brand	Furuno
Model	1824C
Category	Marine Radar
Language	English