SP - 6
SPECIFICATIONS OF VIDEO PLOTTER GD-1920C
1 PLOTTER FUNCTION
1.1 Projection Mercator
1.2 Usable Area 85 latitude or below
1.3 Effective Area 211.2 x 158.4 mm
1.4 Display pixels 640 x 480 dots
1.5 Position Indication Latitude/longitude, Loran C LOP or DECCA LOP
1.6 Effective Projection Area 0.125 nm to 1,024 nm (at equatorial area)
1.7 Track Display Plot interval: by time (1 sec. to 99 min. 59 sec.) or
by distance (0 to 99.9 nm)
1.8 Colors Red, yellow, green purple, light-blue, blue, white
1.9 Memory Capacity Track/mark: 8000 points, Waypoint: 999 points
1.10 Storage Capacity Simple route: 200 routes with 35 waypoints each
1.11 MOB 1 point
1.12 Quick Routes 1 course with 35 waypoints max.
1.13 Electronic Chart SD card - NAVIONICS GOLD or C-MAP NT MAX
1.14 Alarms Arrival and Anchor watch, Cross track error and proximity
alarms, Ship’s speed in and out alarms, Water temperature,
Trip alarm, Fish alarm, Bottom alarm (ETR required), Grounding
alarm
2 POWER SUPPLY
2.1 Rated Voltage/Current 12-24 VDC: 4.2-2.1 A
2.2 Rectifier (option) PR-62: 100/110/220/230 VAC, 1 phase, 50/60 Hz
3 ENVIRONMENTAL CONDITION
3.1 Ambient Temperature -15°C to +55°C
3.2 Relative Humidity 93% or less at +40°C
3.3 Waterproofing IPX5
3.4 Vibration IEC 60945-4
th
-2 Hz-5 Hz and up to 13.2 Hz with an excursion of ±1 mm ±10%
(7 m/s
2
maximum acceleration at 13.2 Hz);
-above 13.2 Hz and up to 100 Hz with a constant maximum
acceleration of 7 m/s
2
.
4 COATING COLOR
4.1 Display Unit N3.0
To Next Page
Loading...
