3. STEERING MODE
3-9
180º TURN (for AUTO mode only)
This function changes the current set course by 180º in the opposite direction.
After the 180º turn completely, the message “TURN COMPLETED” appears.
Return to the AUTO mode by pressing the course control knob.
Example of 180º maneuver in turn mode
360º TURN (for AUTO mode only)
This function also provides a continuous turn feature with a constant rate of turn
in a circle. This may be used for circling fish, purse seining, etc.
After the 360º turn is complete, the message “TURN COMPLETED” appears.
Return to the AUTO mode by pressing the course control knob.
Example of 360º maneuver in turn mode
To Next Page
Loading...
