EasyManua.ls Logo

Furuno DS-50 - User Manual

Furuno DS-50
29 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
DOPPLER SPEEDLOG
DS-50
OPERATOR'S MANUAL
www.furuno.com
Model

Table of Contents

Other manuals for Furuno DS-50

Preview: Installation Manual
Installation Manual63 pages

Questions and Answers

  • L
    Linda TorresJul 29, 2025
    What to do if Furuno Industrial Electrical power cannot be turned on?
    • A
      Alison ChambersJul 29, 2025
      If your Furuno Industrial Electrical equipment won't power on, start by adjusting the brilliance setting, as it might be set too low. Then, inspect the power cable for any signs of damage. Ensure the power connector is securely fastened. Finally, check the fuses on the processor unit; if a fuse is blown, determine the cause before replacing it with the correct type, referring to the fuse rating located near the fuse holder.
  • J
    Jasmine MurrayAug 14, 2025
    Why is my Furuno Industrial Electrical showing poor accuracy?
    • I
      Isabella SmithAug 14, 2025
      If you're experiencing poor accuracy with your Furuno Industrial Electrical equipment, check the ground connection for corrosion or looseness. Additionally, verify that the cables of other equipment are not running near the transducer cable.

Summary

Safety Instructions

Critical Warnings

Electrical shock hazards, operating precautions, and risks of improper use.

Operational Cautions

Cautions regarding equipment usage, temperature limits, cleaning, and handling.

Technical Specifications

General System Specifications

Details ultrasonic frequency, number of beams, measuring ranges, accuracy, display, and I/O signals.

Optional Equipment Specifications

Operation and Controls

Main Display Unit Overview

Main and Compartment Controls

Powering On and Panel Dimmer Adjustment

Step-by-step guide for turning on the equipment and adjusting panel brightness.

Speed Tracking and Measurement Modes

Setting and Resetting Distance Run

System Settings Configuration

Details the system settings, their ranges, and default values.

System Setting Procedure

Step-by-step guide for accessing and modifying system settings.

Control Box Operation

Maintenance and Troubleshooting

Preventive Maintenance and Cleaning

Troubleshooting Common Issues

Guidance for resolving power issues and poor accuracy.

Operational and Interconnection Checks

Diagnostic Program and Error Display

Processor Unit Error Indicators

Principle of Operation

Digital Interface (IEC 61162-1)

Furuno DS-50 Specifications

General IconGeneral
BrandFuruno
ModelDS-50
CategoryMarine Equipment
LanguageEnglish

Related product manuals