7
Control description
Main controls
MODE selector Selects tracking mode among ground, water and automatic. Each time the key is
pressed the tracking mode changes in the sequence of ground, water and
automatic. Current tracking mode is denoted by the tracking mode lamps.
Distance/Keel Displays distance run or depth below keel at each pressing.
Clearance selector "Distance" or "Keel Clearance" lights to show current selection.
DIMMER controls Adjust panel brilliance.
Controls in compartment
kn / m/s
SET
Distance Set
POWER
WX
kn/ m/s selector Selects the unit of speed measurement; knots or meters/second.
SET key Sets distance run display.
Arrow keys Set the distance run indication.
POWER switch Turns power on and off.
To Next Page
Loading...
