Furuno 520 - Page 70

MENU TREE
MN-2
ALARM SETUP See page MN-1.
SEA STATE ( FULL-AUTO, SEMI-AUTO, MANUAL-CALM,
MANUAL-MODERATE, MANUAL ROUGH)
DEVIATION LEVEL* (
AUTO , LEVEL)
MANUAL PARAMETERS** (WHEATHER; 1 to 10 ,
RUDDER GAIN; 0.1 to 2.0,
COUNT RUDDER; 0.1 to 4.0)
AUTO TRIM (OFF,
ON , 1-100, 40 )
AUTO NET TOWING (
OFF , ON)
SPD CALC. (
SOG , STW, MANUAL)
RADIUS OF ORBIT (0.05 to 9.99 nm,
0.10 nm )
SPIRAL SPEED (0.1 to 8.0 kt,
1.0 kt )
SYSTEM DATA
[MENU] key
AUTO mode menu
NAV mode menu
ALARM SETUP See page MN-1.
NAV SRC (
PORT 1 , PORT 2, BOTH)
SEA STATE ( FULL-AUTO, SEMI-AUTO, MANUAL-CALM,
MANUAL-MODERATE, MANUAL ROUGH)
DEVIATION LEVEL* (
AUTO , LEVEL)
MANUAL PARAMETERS** (WHEATHER; 1 to 10 ,
RUDDER GAIN; 0.1 to 2.0,
COUNT RUDDER; 0.1 to 4.0)
AUTO TRIM (OFF,
ON , 1-100, 40 )
WAYPOINT SWITCHING (
AUTO , MANUAL)
NAV MODE (
XTE , COURSE)
FISH MODE (
OFF , ORBIT TO STBD,
ORBIT TO PORT, FIGURE EIGHT)
SPD CALC. (
SOG , STW, MANUAL)
RADIUS OF ORBIT (0.05 to 9.99 nm,
0.10 nm )
SPIRAL SPEED (0.1 to 8.0 kt,
1.0 kt )
SYSTEM DATA
[MENU] key
MESSAGE (Shows error messages.)
CONTRAST/BRILLIANCE (Contrast: 1 to 16, 10 , Brill: 1 to 8, 8 )
ADVANCED AUTO (
OFF , ON)
*: Available only when FULL-AUTO is selected at SEA STATE.
**: Default settings are depends on ship's length and width entered on installing.
MESSAGE (Shows error messages.)
CONTRAST/BRILLIANCE (Contrast: 1 to 16,
10 , Brill: 1 to 8, 8 )
*: Available only when FULL-AUTO is selected at SEA STATE.
**: Default settings are depends on ship's length and width entered on installing.