EasyManua.ls Logo

Furuno CH-270 - 5.4.3 SYSTEM SETTING 2 menu description

Furuno CH-270
118 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
5. MENU OPERATION
5-11
5.4.3 SYSTEM SETTING 2 menu description
OFF 15 kt 20kt
OFF (OFF, 5-15kt)AUTO RETRACTION :
SPEED ALARM/MESSAGE
:
DEFAULT SETTING : NO YES
: SELECT
: CHANGE MENU: END
MENU
1 2
** SYSTEM SETTING 2 **
MAXIMUM ALLOWABLE SPEED IS 15 KNOTS WHILE SOUNDDOME IS BEING
RETRACTED. IF VESSEL HAS RAPID ACCELERATION CAPABILITIES,
AUTO RETRACTION SETTINGS OF 10-12 KNOTS ARE MANDATORY TO
AVOID CATASTROPHIC DAMAGE TO SOUNDOME ASSY. ANY PHYSICAL
DAMAGE TO THE SOUNDOME ASSY. IS CONSIDERED ABUSE AND IS
NOT A WARRANTY ISSUE.
STABILIZER :
OFF ON
SWEEP INDICATOR : DOT LINE
System setting 2 menu
SYSTEM SETTING 2 menu description
STABILIZER: Choose ON to compensate for effects of ship’s pitching and rolling.
Requires Motion Sensor MS-100 or Clinometer BS-704.
AUTO RETRACTION: Set the speed at which automatic retraction of the transducer is to
occur. Requires speed input.
Note: The transducer may be retracted at a speed other than the intended one when
ship’s speed data is erroneous. Therefore, set the speed considering the
accuracy of speed data.

Table of Contents