Furuno DRS2D - Mounting of Power Supply Unit

8
1.4 Mounting of Power Supply Unit
1.4.1 PSU-013 (for DRS25A)/PSU-012 (Option)
For combinations shown below, the optional power supply unit PSU-012 or PSU-017 is necessary.
The PSU-013 is required for any DRS25A installation
*: The power supply unit is shipped with 15A fuse. Replace fuse with 10A when using the unit with
24V ship’s battery.
*: The PSU-017 is available in the combination of DRS2D/4D and TZT9/14/BB. See section 1.4.2.
Contents of PSU-012/013
Name Type Code No. Qty Remarks
Power supply unit PSU-012 - 1
PSU-013 - For DRS25A
Cable assy VL3P-VV-S2X2C-AA050 000-152-217-11 1 5 m
LAN cable MOD-Z072-050+ 000-167-176-10 1 5 m, standard
Self-tapping screw 4x20, SUS304 000-158-850-10 4
Fuse* FGB0 250V 10A 000-155-839-10 2 For 24 VDC
FGB0 250V 15A 000-157-874-10 2 For 12 VDC
XH Connector Assembly 03-2345(2P) 001-183-760-00 1 For TZT9/14/BB
MFD8
MFD12
MFDBB
DRS2D/4D DRS4A
DRS6A
DRS12A
NO
NO
NO
NO
NO
NO
NO
PSU-012
NO
TZT9
TZT14
PSU-012
PSU-012
PSU-012
PSU-012
PSU-012
PSU-012
PSU-012
PSU-012
PSU-012
PSU-012 or PSU-017*
PSU-012 or PSU-017*
TZTBB
PSU-012 or PSU-017* PSU-012 PSU-012 PSU-012