Furuno ECDIS FMD-3100 - Panel Computer Unit PCU-3010

2. WIRING
2-4
2.1 Panel Computer Unit PCU-3010
2.1.1 Connections to the PCU-3010
Referring to the figure below, connect the PCU to its respective peripherals.
DPYC-1.5
USB1 to USB4
*1
AIS, GPS,
GYRO, LOG
Serial Interface (C1 to C4)
*2
To ship’s earth
Ground cable, IV-1.25sq.
*3
: Select AC or DC power supply.
*4
: Use HUB-100 for IEC 61162-450 Ed. 1 complying network.
*5
: Connnect with 3COX-2P-6C cable and supplied DP-VGA
adapter.
*6
: Connect with DVI-D/D S-LINK(5m) cable and Hatteland
Technology make DP-DVI adapter DPM2DVI-DF-A1
(SG300000198).
(cable, adapter: arrange locally)
24 VDC
*3
100-230 VAC
*3
SSD ports (from top)
Tray 1: Chart memory
Tray 0: Program memory
DisplayPort (DP++)
To external monitor*
5
, VDR*
5
, or external monitor with DVI input*
6
.
Note: VDR devices must be connected via a frame synchronizer.
No use
TTYCSLA-4 or
TTYCSLA-1Q
TTYCSLA-1Q
*2
C1 port
C2 port
C3 port
C4 port
HUB-3000
*4
, Sensor Adapter, or VDR
HUB-3000: DTI-C5E350 VCV cable
Sensor Adapter: FR-FTPC-CY cable
LAN2
To HUB-3000
DTI-C5E350 VCV cable
LAN1
Connect drain wire of C3 and C4 here.
Connect drain wire of C1 and C2 here.
Tray 1Tray 1
Tray 0Tray 0
USB1
USB2
USB3
USB4
: RCU-030
: USB storage or DVD drive
: 5139U BLACK or
SKB-E3U (keyboard)
: Connect USB storage or
DVD drive with ext. cable.
*1