EasyManua.ls Logo

Furuno FAR-2338-NXT - Page 4

Furuno FAR-2338-NXT
195 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SAFETY INSTRUCTIONS
ii
Observe the following compass safe
distances to prevent deviation of a
magnetic compass:
Note: For more information, please refer to IMO
SN/Circ.271 “Guidelines for the installa-
tion of shipborne radar equipment.”
Construct a suitable service platform
from which to install the antenna unit.
Serious injury or death can result if
someone falls from the radar antenna
mast.
Attach protective earth securely to the
ship's body.
The protective earth (grounding) is
required for the AC power supply to
prevent electrical shock.
2.15 m 1.40 m
2.45 m 1.60 m
3.05 m 1.90 m
1.90 m 1.20 m
0.85 m 0.55 m
0.90 m 0.55 m
0.50 m 0.30 m
0.95 m 0.60 m
0.95 m 0.60 m
1.20 m 0.75 m
2.85 m 1.80 m
1.00 m 0.60 m
Junction Box
(RJB-001)
1.10 m 0.70 m
1.65 m 1.05 m
Do not open the equipment.
This equipment uses high voltage
electricity which can shock, burn or
cause serious injury. Only qualified
personnel can work inside the equipment.
WARNING
Use only the specified power cable.
Fire or damage to the equipment can
result if a different cable is used.
CAUTION
Turn off the power at the mains
switchboard before beginning the
installation.
Fire, electrical shock or serious injury can
result if the power is left on or is applied
while the equipment is being installed.
Be sure that the power supply is
compatible with the voltage rating of
the equipment.
Connection of an incorrect power supply
can cause fire or damage the
equipment.
Do not install the units (other than the
antenna unit) in a dusty environment,
or one where the units may get wet
from rain or water splash.
Dust or water in the units can result in
fire, electrical shock, or damage to the
equipment.
Standard
compass
Unit
Steering
compass
Control Unit
(RCU-014)
Control Unit
(RCU-015)
Control Unit
(RCU-016)
2.00 m 1.25 m
Transceiver Unit
(RTR-108)
4.50 m 2.90 m
Transceiver Unit
(RTR-109)
Antenna Unit
(X-band, TR-UP, 12 kW)
Antenna Unit
(X-band, TR-UP, 25 kW)
Antenna Unit
(S-band, TR-UP,
solid state radar)
Antenna Unit
(S-band, TR-UP,
magnetron radar)
1.90 m 1.60 m
Antenna Unit
(X-band, TR-DOWN)
1.55 m 1.05 m
Antenna Unit
(S-band, TR-DOWN)
Processor Unit
(RPU-025)
Monitor Unit
(MU-190)
Monitor Unit
(MU-231)
Monitor Unit
(MU-270W)
Intelligent HUB
(HUB-3000)
Switching HUB
(HUB-100)

Other manuals for Furuno FAR-2338-NXT

Related product manuals