2-17
2.18 Correcting Speed/Water Temperature Readout
Wrong ship's speed or water temperature indication can be corrected on the system menu 2 as
follows:
1. Set the [MODE] switch in the MENU position.
2. Press [▼] until GO TO SYSTEM MENU appears and then press [+] to select YES.
3. Use [+] or [-] key to select system menu 2.
[1] [2] [3]
OFF L/L R/B CSE
NMEA CIF
OFF OWN NMEA
OFF OWN NMEA
OFF LOW HIGH
+0 % [-50 - +50]
+0.0 °F [-20 - +20]
(* SYSTEM MENU [2] *)
(ADJUSTABLE OWN SENSOR ONLY.)
OWN SENSOR
TEMPERATURE
MENU :
NAV DSP :
FORMAT :
SPD SEL :
TMP SEL :
TMP GRP:
SPD ADJ :
TMP ADJ :
/ : TO SELECT ITEM.
-/+
:
TO SET CONDITION.
OWN SENSOR
SPEED
0.0 kt °F
4. Select SPD ADJ or TMP ADJ as appropriate.
5. Use [+], [-] to enter offset.
To Next Page
