Furuno FCV-668 - Menu Tree

A-1
MENU TREE
[MODE] switch in
MENU position
Press [+] at
MENU.
[1] [2] [3]
15 (10 - 1000)
30
60
120
200
400
600
1000
X2 X3 X4 X5
10 20
(* SYSTEM MENU [3] *)
MENU :
RANGE1 :
RANGE2 :
RANGE3 :
RANGE4 :
RANGE5 :
RANGE6 :
RANGE7 :
RANGE8 :
ZOOM RANGE:
B/L RANGE:
/ : TO SELECT ITEM.
-/+
: TO SET CONDITION.
OFF NL1 NL2 NL3
NOISE LIMITER
HUE SELECTION
1 (1 - 7)
0 (-20 - +20)
GAIN ADJUST 50KHZ*
CLUTTER LEVEL
0 (0 - 3)
VRM WHT
/ : TO SELECT ITEM, 1/2
-/+
: TO SET CONDITION.
MARKER (VRM)
* 200 kHz depending on
transducer used.
DEFAULT CONTROL SETTINGS
SHIFT: 0
BRILL: 6
ADVANCE: 4
SIG LEV: 0
ALARM: OFF
A-SCOPE: OFF
MARKER: 0
[1] [2] [3]
OFF L/L R/B CSE
NMEA CIF
OFF OWN NMEA
OFF OWN NMEA
OFF LOW HIGH
+0 % [-50 - +50]
+0.0 °F [-20 - +20]
(* SYSTEM MENU [2] *)
(ADJUSTABLE OWN SENSOR ONLY.)
OWN SENSOR
TEMPERATURE
MENU :
NAV DSP :
FORMAT :
SPD SEL :
TMP SEL :
TMP GRP:
SPD ADJ :
TMP ADJ :
/ : TO SELECT ITEM.
-/+
: TO SET CONDITION.
OWN SENSOR
SPEED
0.0 kt °F
[1] [2] [3]
m ft fa PB
kt MPH KPH
° C ° F
WEAK MED STRG
( * SYSTEM MENU [1] *)
MENU :
DEPTH :
SPEED :
TEMP :
F/A LEVEL :
/ : TO SELECT ITEM.
-/+
: TO SET CONDITION.
PRess [+] at
GO TO SYSTEM
MENU.
Default setings are circumscribed.
NO YES
GO TO SYSTEM MENU
/ : TO SELECT ITEM, 2/2
-/+
: TO SET CONDITION.
OFF ON
ZOOM MARKER DISPLAY
Press [ ] at MARKER.
Press [+] at
MENU.
Press
[-].
Press
[-].