1. MOUNTING THE UNIT
4
10. Remount the antenna unit (upper) on the antenna base. (Torque: 2.6 N·m ± 10%)
11. Wrap self-bonding tape around the connection of antenna base and pipe, and then wind
vinyl tape over self-bonding tape. These tapes should be winded closely.
12. Fix the earth wire RW-4747 (supplied) between the ground terminal on the antenna unit
and the ship’s ground point.
Mounting
13. Apply silicone sealant (supplied) to the earth terminal and three screws at the bottom of
antenna base.
14. Fix the antenna cable to the mast with a cable tie (local supply).
www.reelschematic.com
www.reelschematic.com
To Next Page
Loading...
